Page 243 - byob-catalog

PLUMBING
241
Designed to meet the rigorous demands of life at sea where the requirement calls for dependable, pressurized plumbing for hot and cold water service. Whether your appli- cation calls for fresh water, raw water, grey water or potable drinking water. Connectors meet or exceed the requirements by outperforming other plumbing systems.
How to make a connection
To make a connection, the Flexpipe is simply pushed in by hand; the unique patented collet locking system then holds the fitting firmly in place without deforming it or restricting flow.
The fitting grips before it seals. Ensure the fitting is pushed in
Cut the tubing square, ensuring it is free of score marks, burrs and sharp edges.
to the tube stop.
Pull on the SeaTech to check the security. It is con- sidered good plumbing practice to test the system prior to use.
Push the tube into the fitting, to the tube stop. The collet has stainless steel teeth which hold the fitting firmly in position while the “O" Ring provides a leak proof seal.
Ensure the system is depressurized before removing fittings. Push in collet squarely against face of fitting. Hold collet in this position, then remove the fitting. The fitting can then be re-used.
Sea Tech FlexPipe Tubing
Hot/Cold
SOLD FULL LENGTHS ONLY
Sea Tech tubing is produced from a high-performance, cross-linked polyetheylene material. Sea Tech tubing is formulated and manufac- tured in 3/8" CTS (1/2" O.D.), 1/2" CTS (5/8" O.D.), 3/4" CTS (7/8" O.D.), and 1" CTS (1-1/8" O.D.) sizes. Sea Tech tubing is NSF listed, FDA recog- nized and available in multiple colors for easy water line identification. Tubing Performance Rating: Operating Pressure: Vacuum to 160psi. Max temperature: 108°F @ 100psi, 72°F @ 160psi.
CTS = Copper Tube Size 1/2" CTS = 5/8" O.D. 3/4" CTS = 7/8" O.D.
1" CTS = 1-1/8" O.D.
mfr
STT
FIG 6013
Part No. Each
81902022 $81.35 81902021 $71.10 81902019 $81.35 81903233 $146.34 81903236 $164.10 81903239 $136.46
Female Swivel Elbow
Plastic
Each Size
$11.17 1/2" CTS x 1/2" FIPS
50 & 100 FT. ONLY
Length Size
15mm OD 15mm OD 15mm OD 22mm OD 22mm OD 22mm OD
Flow Size
1/2" 1/2" 1/2" 3/4" 3/4" 3/4"
Male Stem
Plastic
Each
Length Color
50 ft. White 50 ft. Red 50 ft. Blue 50 ft. White 50 ft. Red 50 ft. Blue
Union Check Valve
Plastic
Part No. Each Size
0959475 $13.03 1/2" CTS
mfr
STT
Part No.
0959098
Part No.
0959109
In-Line Valve
Plastic
Each
$20.11
End Stop
Plastic
Each
$9.31
Size
1/2" CTS
Size
Part No.
0959365
Part No.
0959088
Size
1/2" CTS
$9.68 1/2" CTS x 1/2" IPS
Part No.
0959090
$5.21 1/2" CTS x 1/2" IPS
Male Elbow
Plastic
Each Size
FIG 7010
SEA TECH FLEX PIPE & FITTINGS