Page 258 - byob-catalog

256
PUMPS
FIG 9358
N990RHN26
N990RHN76
PUMPING WATER
PUMPING OIL
GPM Free Flow
Amps/ Fuse
Wire Size
GPM Flow Free
Amps/ Fuse
Wire Size
12V SPO60 24V
7.0
7/15 5/10
#12 up to 40’
4.5
17/30 8/15
#8 up to 40’
Groco Vane Pump’s vane impeller and blades are not affected by diesel fuel or crankcase oil.
2-034
Cover O-Ring
Part No.
Each
Female AMPS Ports 13.8/6.9 1" IPS 39 1" IPS
Diesel Fuel and Oil Transfer Pump
Reversible
@ 0’ Head HP GPM
1 23/10 PSI
1 23/10 PSI
OBN990RH-N26 $1,849.00 OBN990RH-N76* $2,499.00 OB12010 $489.00 *24-Volt DC rated for intermittent service
Volts
115/230 AC-60HZ
Oberdorfer Diesel Fuel Transfer Pumps
mfr
OBE
These bronze gear pumps are recommended for application as transfer of diesel fuel from tank to tank for ballast purposes, or from ballast or integral tanks to day tanks. The shaft is 303 stainless steel riding on carbon graphite bearings. Housing and gears are bronze and the seal is a lip type Buna. Equipped with a built-in relief valve as these are positive displacement pumps. They weigh 44 lbs. Self-priming after initial wetting of gears to 10’ maximum suction lift, but for best performance should be mounted as close to the liquid source as possible. If suction line is over 3’ long, pipe size should be increased one to two sizes larger. Space requirements are approximately 9-1/2" H x 9-1/2" W x 23" L. Not to be used for gasoline transfer. Not ignition protected.
24 DC
Repair Kit Series 990 Series
FIG 1709
SPO
Vane Pump
mfr
GRO
SPO Self-Priming Pumps can be used for bilge pumping, (screened inlet) diesel fuel transfer or deckwash. The 60 Series is self-priming to 24" and will pump more than 80’ of head. Inlet and outlet ports are 1/2" female NPT an comes with two 1/2" male NPT x 3/4" GHT adaptors. Has a 316 stainless steel shaft. Dimensions: 4-1/2" H x 4" L. All SPO models feature ignition-protected ball bearing motors. Do not pump gasoline or other explosive liquids. Weighs 7 lbs.
Part No.
SPO-60-R 12V SPO-60-R 24V
Part No.
Each
$559.99 $579.99
Volt
12 24
G.P.M. Amps Water/Oil Water/Oil 7/4.5 7/17
7/4.5 5/8
Each
$2.00
SPARE PARTS
Volts/Description
Description
Heavy-Duty Reversible Pump Heavy-Duty Reversible Pump
Fits System/Pump Model
SPO after s/n 1088, SPO60 & 80
Diesel Fuel Transfer Pumps
Diesel/Oil Transfer Pumps
mfr
MAT
Part No.
M164-200-12 M164-000-12 M164-060-12 M164-060-13 M164-300-12 M164-300-13 M164-500-12 M164-500-13
Each Volts
$148.68 12 DC $197.36 12 DC $306.22 12 DC $306.22 24 DC $366.39 12 DC $366.39 24 DC $529.24 12 DC $529.24 24 DC
Ports
3/8" IPS 3/8" IPS 1/2" IPS 1/2" IPS 1/2" IPS 1/2" IPS 3/4" IPS 3/4" IPS
Amps PSI
G.P.M.
FIG 6806
5 22 2.6 10 29 4 11 29 6.87
6 29 6.87 20 36 10.5 11 36 10.5 16 29 12.2
8 29 12.2
mfr
MAT
FIG 6804
UP2, UP3, UP6/12 and UP6/24 are self-priming (to 4.9 ft.); UP12/12 and UP12/24 are self-priming (to 13.1 ft.). UP14/12 and UP14/24 are self-priming to 13.1 ft. All are electric pumps with bronze gears. The pump bodies are nickel-plated brass and have stainless steel shafts. For use with diesel fuel, and antifreeze. Weight: 7.3 lbs.
This is a self-priming (to 4.9 ft.) electric vane pump with integrated by-pass valve and aluminum body. The rotor and vanes are made of resin. It is for use with diesel, oil, and anti-freeze. Weight: 4.4 lbs.
Part No.
M166-026-12 M166-026-13
Each
$202.67 $202.67
Volts
12 DC 24 DC
Ports Amps P.S.I. G.P.M.
1" Barbs 19 17.4 11.9 1" Barbs 9.5 17.4 11.9
FUEL & OIL TRANSFER PUMPS