Page 32 - byob-catalog

30
PAINT
REDUCERS, CONVERTERS & SPECIALITY ADDITIVES
Used to clean equipment and surfaces, and also blended into Awlgrip coatings to fine-tune flow and evaporation rates.
Topcoat Reducer
Part No.
T0001/1QTUS T0001/1GLUS
T0002/1GLUS
T0003/1QTUS T0003/1GLUS
T0005/1QTUS
T0031/1QTUS T0031/1GLUS
mfr
AWL
Size Case Each
Description
Fast-evaporating reducer for use with spray-applied Awlgrip finishes, between 16-24°C/60-75°F.
Fast-evaporating reducer for equipment cleaning and use with Awlgrip finishes, between 13-21°C/50-70°F.
Standard reducer for use with Awlgrip finishes between 21-32°C/70-90°F. Gallon
Hot Weather Reducer (90-105)
Epoxy reducer for use when brushing or rollering 545 Epoxy Primer or Awlquik Primer.
Quart
Quart Gallon
Size
Quart Gallon
Gallon
Quart Gallon
Gallon
6 $21.68 4 $65.05
4 $56.86
6 $22.28 4 $66.85
6 $34.27
6 $27.48 4 $82.44
mfr
AWL
Case Each
6 $60.45 4 $60.45
4 $73.04
Quart
Epoxy Primer Reducer
Part No.
T0006/1QTUS T0006/1GLUS
T0073/1GLUS
Description
Standard epoxy reducer for use with a range of spray-applied Awlgrip primers.
Specialized reducer formulated for use with Ultra Build Primer.
Flattening Agent
Awlgrip Flattening Agent can be used with Awlgrip Topcoat and Awlcraft 2000 to achieve a flat or semi-gloss finish. Newly reformulated for greater stability.
• Ideal for interior application.
• Recommended for use at 20°C/68°F or higher. • Tailored for application by spray.
mfr
AWL
Part No.
G3013/1QTUS
G3013/1GLUS
Size
Quart
Gallon
Case Each
6 $51.98
2 $156.19
GripTex Non-Skid Additive
Griptex is a non-skid polymer bead aggregate used to coat deck and step areas with a non-slip coating. Apply by spray or mix with any Awlgrip finish.
• Available in Fine, Coarse and Extra Coarse. • Can be applied by spray.
• Compatible with any Awlgrip finish.
mfr
AWL
Part No.
73012/1QTAL 73012/1GLAL
73013/1QTAL 73013/1GLAL
73237/1QTAL
Description
Fine Fine
Coarse Coarse
Extra Coarse
Size
Quart Gallon
Quart Gallon
Quart
Case Each
4 $40.95 2 $122.84
4 $44.42 2 $133.46
4 $47.48
Pro-Cure Accelerator
Pro-Cure is a specialized accelerator used to reduce dry and cure times for Awlgrip and Awlcraft 2000. Functions as an additive for finishes, do not use with primers.
• Can reduce dry times to as little as 1-2 hours. • Tailored for use with Awlgrip finishes.
• Streamlines the application process.
mfr
AWL
mfr
AWL
Part No.
73014/2OZUS
73015/2OZUS
Description
X-98 Fast Accelerator
X-138 Inhibited Accelerator
Size Case
2 oz. 12
2 oz. 12
Each
$35.98
$35.98
$35.98
Each
$19.07
$19.07
HDT Activators & Converters
Fore use with Awlgrip® HDT Paint & Clearcoat.
Part No.
A0010/1QTUS
A0015/1QTUS
A0020/1QTUS
Description
HDT Slow Activator
HDT Medium Activator
HDT Fast Activator
Size
Quart
Quart
Quart
AWLGRIP