Page 334 - byob-catalog

332
ENGINE ACCESSORIES
WM SERIES WHISPERMAT PHYSICAL PROPERTIES Density .......................................................... 2 or 4 lb./cu. ft. ± 10% Tensile Strength.....................................................................33.7 psi Color ................................................................Silver/Charcoal Gray Tear Resistance ................................................................ 4.3 lbs./in. Compression Set................................................................ 10% max. Clickability.................................................................................. Good Steam Autoclave ...................................... 25% Maximum variance Thermal Conductivity ................................................................ 0.25 (Btu-in./hr. x sq. ft. x deg. F)
Flame Resistance .................................UL-94 (self-extinguishing) Sound Absorption..............................................................NRC-0.71 Temperature Resistance........................................... -45 to 250° F. Chemical Resistance...........................................Excellent for oils, ............................................................................alkali and mild acids
WM2-16-0.75E-RP-00
FIG 6178
WM2-16-0.25A-RP-00= 9 square feet/sheet WM2-16-0.75E-RP-00= 9 square feet/sheet WM-MBW1= 8 square feet/sheet
Each
$47.28
Each
$53.92
Whispermat
Acoustical Foam Insulation
WM-MBW1
Stickclip and White Button
1-1/2"
mfr
SDN
Part No.
WM2-16-0.25A-RP-00* WM2-16-0.75E-RP-00* WM-MBW1*
Color
Silver Silver White
Description
White Tape
1 Stickclip and 1 Button
Size
1/2" Th x 24" W x 54" L 1" Th x 24" W x 54" L 1" Th x 24" W x 48" L
ACCESSORIES
3" x 108 ft. —
Box
10 5 5
Case
20 100 pr.
White Vinyl
Designed to quiet noisy areas onboard. It is especially effective at deadening sound from engines and generators. Also can be used in air duct- ing systems and as a carpet underlayment (UL-25). Whispermat is constructed by sandwiching a flexible vinyl sound barrier between two layers of sound absorbing foam. The side facing the noise is faced with either a metalized mylar or a white vinyl facing. It will not rot or mildew, is tear resistant and is self-extinguishing (meeting fire requirements of UL-94HF-1). INSTALLATION TIPS: Installed with contact adhesives, battens, stick- clips or screw and fender washers. WM2-16-0.25A-RP-00 is a one pound per square foot vinyl barrier between two layers of 1/4" foam, faced with reinforced metalized mylar. Weight: 9.25 pounds. WM2-16-0.75E-RP-00 is a one pound per square foot vinyl barrier between one layer of 1/4" foam and a layer of 3/4" foam, faced with reinforced metalized mylar. This is the standard for lining engine rooms, engine hatches and gen- erator compartments. Weight: 9.6 pounds. WM-MBW1 is one pound per square foot vinyl barrier bonded to 1" of foam. The white vinyl facing is designed for easy cleaning and is extremely tear resistant. This is perfect for large yacht engine rooms and machinery spaces. Weight: 12 pounds. Splicing tape comes in WHITE. Used to splice and seal seams, penetrations and openings. SC are stickclips which are used with white buttons (INCLUDED with stickclips) to hold insulation in place.
Part No.
White SC
mfr
SDN
Size
* WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
10-Piece Aluminum Installation Kit
Vinyl/Foam Composite Sheet
mfr
Soundown Aluminum Installation Kits are used to mount Soundown foam on solid surfaces such as engine boxes, bulkheads, and overhead areas. Kit includes ten 2.5 inch long pins mount- ed on 2 inch square perforated bases. Soundown is fastened using a speed washer and a protective cap.
Vinyl insulation SDN
Polyether formulation that will outlast inferior polyester foams available on the market today. This polyether foam provides the highest level of hydrolytic stability in the harsh marine environment, as the dampness found in the marine environment will promote polyester foam disinte- gration drastically reducing the life of the foam. Acoustic insulation materials work by two processes: Absorption of sound energy, which dissipates sound as heat energy, and reflection, which reflects noise away from a location where quieting is desired.
Part No.
IVF1010MN32
Acoustic Foam Composite Sheet
No vinyl insulation mfr SDN
Soundown Acoustic Absorption Foam is used in appli- cations where barrier treatments are not required. This sound damping foam is excellent for hull linings and pro- vides great absorption performance in occupied spaces. Available in various sizes and two thicknesses 1/2” and 1”. Part No.
IAF10MN32
Part No.
HPA25KD10
mfr
SDN
Seam and Edge Tape
125' x 2" Silver Mylar Edge Tape (HTA20SC) by Soun- down®. Soundown’s line of edge and seam tape is designed to seal Soundown insulation products for a clean, long-lasting installation. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs and deliver great quality at an affordable cost.
Part No.
HTA20SC
ACOUSTIC FOAM