Page 39 - byob-catalog

PAINT
37
Tuff StuffTM High-Build Epoxy Primer
A high-build two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days. Ex- tremely effective for blister preven- tion on fiberglass, or as a bilge coat- ing, because it is resistant to oil and water. It can be used as a universal
primer for corrosion protection on most metals below the water- line such as props, keels, trim tabs, thru hulls and lower units or for priming any metal. Fills deep scratches and gouges in a few coats.
Sea Hawk® Tuff StuffTM Epoxy Primer Kit
Tuff Stuff Low VOC is an extremely high-
build two-part epoxy primer that dries
fast, enabling application of a complete
barrier system and bottom paint in just
two days. Using microsheet silicate tech-
nology, millions of microscopic sheets
overlap and build a 100% water barrier
that protects the surface from moisture
and water penetration. Tuff Stuff Low
VOC is extremely effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water. As a universal primer, it can be used for corrosion protection on most metals below the waterline, and for priming any metal.
Size
Light Gray 2 Gallon Kit
Light Gray 1/2 Gallon Kit
White 1/2 Gallon Kit
mfr
NNC
mfr
NNC
Part No. Each
1284/GLKIT $201.26
1284/QTKIT $66.77
1285/QTKIT $66.77
1285W/GLKIT $201.26
sHAWKocon® Primer
White 2 Gallon Kit
Part No.
1286/1GLKIT
1287W/1GLKIT
Each Description
$201.26 LowVOC Gray
$201.26 VOC White
1241 Surface Tolerant Epoxy Coating System
A multi-purpose, surface tolerant, two-part epoxy coating system that applies easily to non-optimal surfaces yet provides excel- lent chemical abrasion resistance for marine vessels and offshore structures above and below the waterline. Its chemically-cured
Shawkocon is a fast drying, general purpose below the waterline anti-corrosive primer. It's an easy to use multi-functional primer:
• Conversion/Sealer coating over Sea Hawk
Biocop TBT 1200 Series antifouling or any unknown well-adhered antifoulant paint to prevent cracking and promote adhesion of a new antifouling paint.
• Barrier/Sealer
antifoulants to prevent leaching and nn excellent barrier coat to reduce pitting of underwater metals from galvanic corrosion on running gear, lower units of outboards, keels, and I/O's.
coating over incompatible or unknown
formulation allows application at low temperatures, and to damp surfaces, even those exhibiting flash rust.
Part No.
SH984/GL
SH984/QT
Each Size
$94.83 Gallon
$26.70 Quart
mfr
NNC
Part No.
1241BASE/4GL
1241C/1GL
Each Description mfr
$337.34 Epoxy Base
$74.49 Epoxy Catalyst
Non-Sanding Primer
Non-Sanding Primer 1266 is designed for use on a new fiberglass hull when sanding is prohibited by manufacturer. 1266 softens existing gelcoat to create an adequate chemical bond.
NNC
Black Barrier Coat Coal Tar Epoxy
Sea Hawk Paints Black Barrier Coat Primer, also known as Coal Tar Epoxy provides heavy duty protection for exposures in marine (ship hulls, tanks, piling, etc.) petroleum, (refinery tanks, piping, offshore structures, etc.) water and water treatment. 1255 meets or exceeds all requirements of the Corp. of Engineers Government Specification MIL-P 23236 and
Part No.
1266/GL
1266/QT
Each Size
$110.74 Gallon
$35.98 Quart
mfr
NNC
Specification C-200,
Steel Structures Paint System SSPC Paint 16-68T.
S-76 Tack Coat Primer
S-76 Tack Coat Primer is for use on properly prepared steel, aluminum or galvanized steel. S-76 is an anti-corrosive strontium chromate based primer that is specifically designed for underwater metal surfaces including hulls, running gear, and the lower units of outboards and I/O’s. It provides an excellent barrier to reduce pitting of the metal from
mfr
NNC
mfr
NNC
mfr
NNC
Part No.
1255/5GL
Each Size
$463.03 5 Gallon
1277 Bottom Paint Primer
This high-build, chlorinated, yellow rubber-based primer is recommended for use over old copper- based antifoulants before recoating. Provides excellent corrosion resistance over metal and fiberglass. 1277 Bottom Paint Primer is also an excellent moisture vapor transmission (MVT) barrier coat to protect the hull against corrosion and moisture damage.
galvanic corrosion. S-76 should be used in conjunction with another primer such as Tuff Stuff prior to applying antifoulant/topcoat.
Part No.
1277/GL
1277/QT
1277/5GL
Each Size
$79.57 Gallon
$22.83 Quart
$337.18 5 Gallon
Barnacle Blocker
mfr
NNC
Barnacle Blocker is a zinc-free aerosol spray for- mulated for use on underwater metals includ- ing steel, cast iron, copper, bronze, galvanized steel, lead, and aluminum. Barnacle Blocker is a self-cleaning anti-corrosive primer that provides an excellent barrier on underwater metal surfaces, reducing galvanic corrosion.
Part No. Each
505A/12OZ $22.15
PRIMERS
mfr
NNC
Part No.
S-76/GLKIT
Each Description
$328.59 S-76 & S-76 Catalyst/2 Gallon
Island Prime 1283
Island Prime 1283 sealer primer is recommended for use over previous tin-based antifoulants before recoating to insure excellent adhesion and to seal previous coating. Island Prime 1283 is also an excellent moisture vapor transmission (MVT) barrier coat to protect the hull against moisture damage. Part No. Each Size Part No. Each Size 1283/GL $86.88 Gallon 1283/QT $24.87 Quart
SEAHAWK