Page 56 - byob-catalog
P. 56
300 Mini Pumps (Yellow Heads) These Pumps replace the White (old style) 301A & 301BC pumps
Note:
For Group Size A: See Parts Package
For Group Size B:
Pumps fit containers as packaged
101
105K
54
GENERAL MAINTENANCE
WES FIG 5502
Dispensing Pump
mfr
KEY TO SUCCESS: PUMP FOR PERFECTION
300 Mini Pumps have yellow heads to distinguish them from other mini pumps Do not use these pumps in combination with any pump with a white head. Kit contains all of the parts required for metering Group Size A and B Resins and Hardeners. Additional parts required for Group Size C metering are INCLUDED in the 105-C Resin, 207-SC and 209-SC Hardener.
Part No.
300
ALWAYS MIX RESIN & HARDENERS BEFORE ADDING FILLERS & ADDITIVES
Each Ratio
$20.20 5:1
650K 655K
For Use With
A, B, C No.105 Resin
G/flex Epoxy Repair Kits
mfr
WES
Approx. Size
All
Description
A, B and C Pump Set
FIG 7640
650K Aluminum Boat Repair Kit contains two 4-oz. tubes of G/flex 650 epoxy (resin and hard- ener), 4 grams of 406 colloidal silica, adhesive filler, two application syringes, two mixing pots and two mixing sticks and two pairs of protective gloves. Illustrated, detailed instructions explain how to repair leaking seams and rivets in aluminum boats. 655K Plastic Boat Repair Kit contains 8.4 oz. of pre-thickened G/flex epoxy (4.2-fl. oz. thickened adhesive resin, 4.2-fl. oz.
thickened adhesive hardener), two pairs of protective gloves, five mixing pallets and two mixing sticks. Illustrated, detailed instructions explain how to repair splits and cracks in plastic boats, attach or repair reinforcement points on inflatable boats and repair pinhole leaks in inflatables.
Part No.
650-K 650-8 655-K
Each
$40.00 $25.65 $40.00
Description Case
G/flex Aluminum Boat Repair Kit 6 G/flex Epoxy Resin and Hardener 8 oz. Kit 6 G/flex Plastic Boat Repair Kit 6
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
No. 101 and 105K Fiberglass Repair Kits
WES FIG 5504
101 Handy Repair Pack includes two 16-gram tubes of 105 Resin, two 3.2-gram tubes of 205 Hardener, 3.5 grams of high-density filler, an application brush, mixing stick, pipe cleaner, two cleaning pads and step-by-step instructions. 101T is six 16-gram tubes of 105 Resin and six 3.2-gram tubes of 205 harden- er. 105K kit contains eight packets of West System 105 Resin and 205 Hardener, fiberglass fabric, adhesive filler, fairing filler, glue brushes, mix-
ing pots, mixing stick, application syringe, three pairs of protective gloves and illustrated instructions for completing a variety of com- mon fibergass repairs. Pot life 9-12 minutes. Cure time 6-8 hours.
White Color Pigment
WES FIG 5514
WEST SYSTEM pigments are epoxy-based pastes which can be used to color the epoxy mixture. Pigments should be added at a rate of approximately 1 tea- spoon of pigment to 8 oz. of epoxy. More pigment will increase opaqueness; however, adding pigment leads to a proportional increase in mixture viscosity. Pigments should only be added to epoxy used for sec- ond or third coats because they can interfere with the wetting qualities of the epoxy. Cured pigmented epoxy
surfaces do not provide a final finish surface, but require enamel or polyurethane systems to provide ultraviolet protection.
mfr
mfr
Part No.
501-8
Each Color
$22.50 White
Size Case
4 oz. 6
No. 423 Black Graphite Powder
WES FIG 5513
423 Graphite Powder is a fine black powder that can be mixed with WEST SYSTEM epoxy to produce a low-friction exterior coating with increased scuff resistance and durability. Epoxy/ Graphite is commonly used as a bearing surface and as a coating on rudders.
Each Color Size Case
$21.75 Black 12 oz. 6
Part No.
101 101T 105-K
Each Description Case
$17.30 Handy Repair Pack $29.80 Resin and Hard. Tube Sets $43.60 Fiberglass Repair Kit
36 24 6
Part No.
423
mfr
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
For superior holding strength, it is always best to “Wet Out" the substrate with your resin/hardener mixture before adding any filler.
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
RESIN & FIBERGLASS PRODUCTS