Page 7 - byob-catalog

PAINT
5
mfr
ALEXSEAL® Fast Spot Primer 414
ALEXSEAL® Fast Spot Primer 414 is an acrylic/epoxy-based fast dry and overcoat spot in finish primer with quick dry to sand characteristics. ALEXSEAL® Fast Spot Primer 414 is designed to spot prime a finished primed surface where break through areas have occurred to seal exposed underlying products. Fast Spot Primer 414 should NOT be used below the waterline.
MKZ FIG 1ALX
Mixing Ratio:
P4145 ALEXSEAL® Fast Spot Primer 414 Base – Sand Color C4147 ALEXSEAL® Fast Spot Primer 414 Converter – Clear Color R4042 ALEXSEAL® Epoxy Primer Reducer
1 Parts by Volume
1 Part by Volume
0 to 25% reduction (vol.)
Example: 1 : 1 : 1/2 = 25% reduction for spray application
The amount of reducer required may vary depending on the application conditions.
Allow a 15 minute induction period after mixing base and converter, add reducer and remix.
Application:
Viscosity
Nozzle Size Gravity Gun Nozzle Size Siphon Cup
Fluid Nozzle Size Pressure Pot Atomizing Pressure
Pot Pressure
Zahn #2: ≈ 15-18 sec. DIN 4 cup 4 mm: = 14-18 sec. 1.0 to 1.4 mm (0.040 to 0.050) – Conventional & HVLP 1.6 mm (0.060) – Conventional & HVLP
1.0 to 1.3 mm (0.040 to 0.050) – Conventional & HVLP 3.0 to 5.0 bar (42 to 70 PSI) – Conventional & HVLP 0.7 to 1.5 bar (10 to 20 PSI) – Conventional & HVLP
Apply one or two coats to a wet film thickness (WFT) of 25-50 microns (1-2 mils) per coat. This will achieve a dry film thickness (DFT) of 13-25 microns (0.5-1 mils).
Technical Data Sheet and MSDS Sheets available on request or visit www.alexseal.com
Part No. Each Size Description
C4147 QT $94.00 1 Quart ALEXSEAL® Fast Spot Primer 414 Converter – Clear Color
P4143 QT $94.00 1 Quart ALEXSEAL® Fast Spot Primer – Gray
P4145 QT $94.00 1 Quart ALEXSEAL® Fast Spot Primer 414 – Sand Color
Finish Primer
ALEXSEAL® Finish Primer 442, Converter and Reducer
ALEXSEAL® Finish Primer 442 is an epoxy based finish primer. It offers advanced adhesion qualities to various substrates while providing exceptional sanding characteristics and an improved film build. ALEXSEAL® Finish Primer 442 is a 1 to 1 base to converter mix ratio which is ideal for a variety of cus- tomers. It is designed to be used to prime and seal old and new properly prepared stable surfaces such as gel coat, fiberglass, as well as to seal other ALEXSEAL® primers and filler systems. ALEXSEAL® Finish Primer 442 is designed to cure at cooler temperatures. Using this primer as a base will enhance the “Wet Look" of the ALEXSEAL® topcoats. This product may be used above and below the waterline.
Mixing Ratio Spray:
1 Parts by Volume
1 Part by Volume 10-25% Reduction
P4420 White ALEXSEAL® Finish Primer 442 Base
P4423 Gray ALEXSEAL® Finish Primer 442 Base
C4427 ALEXSEAL® Finish Primer 442 Converter
R4042 ALEXSEAL® Primer Reducer (12% Reduction Preferred) A4429P Accelerator for Finish Primer 442
Application:
Viscosity (Zahn #2) Fluid Nozzle Size Atomizing Pressure Pot Pressure Airless Equipment Airless Equipment
Approx. 25 sec.
1.2 to 1.6 mm (.046 to 0.06) – Conventional & HVLP 3.0 to 5.0 bar (42 to 70 PSI) – Conventional & HVLP 0.7 to 1.5 bar (10 to 20 PSI) – Conventional & HVLP Tip .35 mm-60 to .43 mm-60 (.014-60 to .017-60) Pressure 3.0 to 5.0 bar (42 to 70 PSI)
Apply 2 to 3 coats to a wet film thickness (WFT) of 75-125 microns (3-5 mils) per coat. This will achieve a dry film thickness (DFT) of 75-125 microns (3-5 mils) for a 2-coat application, and 125-200 microns (5-8 mils) for a 3-coat application, using 20% Primer Reducer R4042. Minimum recommended film thickness before sanding is 75 microns (3 mils) DFT. Maximum recommended film thickness during a spray application is 3 coats, totaling 375 microns (15 mils) WFT, or 200 microns (8 mils) DFT.
Technical Data Sheet and MSDS Sheets available on request or visit www.alexseal.com.
Part No. Each Size Description
P4420 GL $184.00 Gallon Finish Primer 442, White (Mix Ratio: 1:1)
P4420 QT $74.00 Quart Finish Primer 442, White (Mix Ratio: 1:1)
P4423 GL $184.00 Gallon Finish Primer 442, Gray (Mix Ratio: 1:1)
P4423 QT $74.00 Quart Finish Primer 442, Gray (Mix Ratio: 1:1)
C4427 GL $184.00! Gallon Finish Primer 442 Converter
C4427 QT $74.00 Quart Finish Primer 442 Converter
R4042 GL $86.00 Gallon Epoxy Primer Reducer
R4042 QT $36.00 Quart Epoxy Primer Reducer
ALEXSEAL